Beckett CF800 Manuale delle Istruzioni Scaricare il pdf (Pagina 10)

Set dimension Z

○ Loosen fastener c in Figure 7. Slide the nozzle line

and plate assembly until dimension Z in Figure 6 is:

CF500 - 1-9/16” ±1/16”

CF800 - 1-3/4” ±1/16”

CF500/800 (with CF140KZ Air Tube) - 1-1/2” ±1/16”

○ When dimension Z (from end of air tube to ﬂ at area

of front face of head) is correctly set, tighten acorn

nut (item c).

○ Attach the oil line from the oil valve to the nozzle line

end. Tighten securely.

○ Before proceeding, check dimension Z once again.

Loosen acorn nut c if necessary to reposition the

nozzle line. Once dimension Z is set, do not loosen

the acorn nut (item) c again. Note that for the

setting of fastener d, refer to the initial head position

procedure under “Start-up Checklist” section (Pg.18).

Insert burner

○ Position the burner in the front of the appliance and

loosely tighten the nuts on the mounting studs. The

burner should be pitched downward 2° as shown in

Figure 4.

○ Secure the burner to the appliance by tightening the

nuts on the burner ﬂ ange mounting studs.

Figure 7 - Adjusting plate assy.

Legend (Figures 7)

Bottom acorn nut

Fastener

Indicator adjusting plate

Secondary adjusting

plate

Figure 6 - Nozzle line assembly in burner

Section: Mount the Burner

CF800

1-3/4”

CF500

1-9/16”

CF500/800

(with CF140KZ Air Tube)

1-1/2”

Z-Dimension

Fuel unit by-pass plug

○ The CF500 and CF800 burners are shipped without

the by-pass plug installed in the fuel line.

○ The by-pass plug must NOT be installed when using

with a one-pipe oil system.

○ The by-pass plug MUST be installed when using a

two-pipe oil system.

Oil supply/return lines

Do Not Install By-pass Plug

with 1-Pipe System

Failure to comply could cause immediate pump seal

failure, pressurized oil leakage and the potential for a

ﬁ re and injury hazard.

y The burner is shipped without the by-pass plug installed.

y Intall the by-pass plug in two-pipe oil supply systems

ONLY.

Install Oil Supply To

Speciﬁ cations

Failure to properly install the oil supply

system could cause oil leakage,

equipment malfunction, puff-back of

hot gases, heavy smoke, asphyxiation,

explosion and ﬁ re hazards.

y Carefully install the oil supply lines, ﬁ ttings and

components using the guidelines provided in this section.

y The oil supply must comply with the latest edition of NFPA

31 (Canada CSA B139) and all applicable codes.

y Do NOT install valves in return lines.

y If the oil supply inlet pressure to the pump exceeds 3 psig

or for gravity feed systems, install an oil safety or pressure

reducing valve (Webster OSV, Suntec PRV or equivalent).

○ Install the oil tank and oil lines in accordance with all

applicable state and local codes.

○ Size the oil supply and return lines using the

guidelines given in the fuel unit literature included in

the literature envelope. Oil line ﬂ ow rate will equal

the burner rate for one-pipe systems. For two-pipe

systems, refer to Table 3 for the fuel unit gear set

capacity - the rate at which fuel is recirculated when

connected to a two-pipe system. However, size two-

pipe oil lines based on this ﬂ ow rate.

○ Use continuous lengths of heavy-wall copper tubing,

routed under the ﬂ oor where possible. Do not attach

fuel lines to the appliance or to ﬂ oor joists if possible.

This will reduce vibration and noise transmission

problems.

○ Install an oil ﬁ lter sized to handle the fuel unit

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Commenti su questo manuale

Nessun commento

More products and manuals for DVD players Samsung

Models	Document Type
AH68-01959S	User Manual Samsung HT-TXQ120 User manual, 36 pages
DVD-C631P	User Manual Samsung DVD-C631P User manual, 24 pages
DVD-FP580	User Manual Samsung DVD-FP580 User's Manual, 63 pages
DVD-HD931	User Manual Samsung DVD-HD931 User manual, 26 pages
SP43T9	User Manual Samsung SP-54T8HE User manual, 64 pages
DVD-HD870	User Manual Samsung DVD-HD870 User manual, 64 pages
DVD-HD950	User Manual Samsung DVD-HD950 User manual, 75 pages
DVD-HR725	User Manual Samsung DVD-HR725 User manual, 135 pages
AK68-00102A	User Manual Samsung AK68-00102A User's Manual, 21 pages
DVD-HD845	User Manual Samsung DVD-HD845 User's Manual, 62 pages
HT-TQ22	User Manual Samsung HT-TQ22 User manual, 80 pages
DVD-V6500	User Manual Samsung DVD-V6500K User manual, 54 pages
AH68-01008B	User Manual Samsung HT-DL200 User manual, 23 pages
SN-324	User Manual Samsung SN-324 User's Manual, 5 pages
HT-TX75	User Manual Samsung HT-TX75 User manual, 39 pages
DVD-V8080	User Manual Samsung DVD-V8080 User's Manual, 34 pages
DVD-L300WDEU	User Manual Samsung DVD-L300WDEU User's Manual, 34 pages
DVD-R160	User Manual Samsung DVD-R160 User's Manual, 83 pages
AH68-02293B	User Manual Samsung HT-C350 User manual, 39 pages
DVD-R155	User Manual Samsung DVD-R155 User's Manual, 75 pages

Beckett CF800 Manuale delle Istruzioni Pagina 10

Commenti su questo manuale

Samsung AH68-02273S manuals

More products and manuals for DVD players Samsung

Beckett CF800 Manuale delle Istruzioni Pagina 10

Commenti su questo manuale

Prodotti e manuali riguardandi no Beckett CF800

Samsung AH68-02273S manuals

More products and manuals for DVD players Samsung